JD 855 parts needed

[RoyJackson]

Well, it's time to do a search online...try this link to Tractor House. They have 10 855's per their website.
That's just one...try a search on Google or one of the other search engines.

BTW, I see you also asked the same question in the Deere forum. One forum is normally quite enough.

 

[mitch_lojek]

I did't have a 3 point hitch either,but got one off of another tractor. as I laid it on the lower arm of a 755, the bends were a little different but the holes lined up. would that help if I gave you those dimensions?

 

[mitch_lojek]

thanks,will do.

 

[dennisthomas]

sure did was it longer or approx the same lenght? is it going to matter if it is approx 2-3 inches longer? i found one that was approx 29 inches i belive i had the measurements before but i lost the measurments on a 755 arms were. i think they were approx 25 1/2 inches hole to hole.

 

[mitch_lojek]

measured the lengths on the lower arm and that was 24" from hole to hole. the lift arm measured approx 15". hope this helps.
mitch

 

[dennisthomas]

thanks a lot sure will help.