JD310 - Too much hydraulic oil?

   / JD310 - Too much hydraulic oil? #1  

rScotty

Super Member
Joined
Apr 21, 2001
Messages
9,583
Location
Rural mountains - Colorado
Tractor
Kubota M59, JD530, JD310SG. Restoring Yanmar YM165D
Any idea what's up with the hydraulic oil on this JD310SG? After running it for a month it works fine, and the level seemed about right in the sight glass when I got it....maybe a little high but not much. But it seems to be creeping up. Tonight I checked a couple hours after shutting it off and still can't see any air space above the oil in the sight glass. Guess I'll let it cool off overnight - although it doesn't seem to run hot. Anyone have any info?
Other than that it seems to run fine.
rScotty
 
   / JD310 - Too much hydraulic oil? #2  
After running the oil will expand some, but are all your booms in the neutral position?( buckets flat on the ground)
 
   / JD310 - Too much hydraulic oil? #3  
What Catdozer said.
Also, if you have a suction side air leak the oil will become aerated and the small air bubbles will displace the oil, but this symptom usually settles out overnight.
I check my oil with all cylinders retracted.
 
   / JD310 - Too much hydraulic oil? #4  
Were can it(oil) come from ?Hydraulic oil black in couler ? Then from engine . Engine oil getting less ? HYDR PUMP FITTED TO ENGINE ?
 

Tractor & Equipment Auctions

NEW Wolverine 72'' Skid Steer Ripper (A53002)
NEW Wolverine 72''...
New Lewis Brothers MFG DB2 Poultry Housekeeper (A53472)
New Lewis Brothers...
2004 TRAVIS 48' WALKING FLOOR REFUSE TRAILER (A53426)
2004 TRAVIS 48'...
2019 Ram 2500 Pickup Truck, VIN # 3C6UR5DL0KG545677 (A51572)
2019 Ram 2500...
12ft Bushog Batwing Mower (A51573)
12ft Bushog...
2011 Ford Crown Victoria Sedan (A51694)
2011 Ford Crown...
 
Top