JDLA115

[leonz]

I am looking at selling my JDLA115 and just buying a replacement mower; and a separate walk behind Yamaha snow blower from a Canadian Yamaha power equipment dealer as they are not sold here.

SO I have the following:

JDLA115 with almost 200 hours
New Briggs and stratton fuel pump installed this year
New electric starter installed this year
New starter battery installed this year
Original manuals from initial purchase
JD snow plow and snow plow frame for LA115 used once
42 inch three spindle mower deck
44 inch JD 2 stage snow blower
2 42-pound suitcase weights with suitcase weight frame
original rear tires are loaded with 4 gallons of windshield washer fluid per tire
original front tires have had inner tubes installed

OEM transmission drive belt was changed 2 years ago

New Gates Series 1 driven belts for snow blower- one mounted, one spare. I no longer use the JD belt driven belt as they are $130.00 plus tax and my fuel cost each to have one in stock as a spare.
New spare OEM drive belt for snow caster
I think I have a new spare drive belt for mower deck

1 new spare snubber pulley for 44 inch snow blower
1 new spare grooved pulley for 44 inch snow blower
The chute and spout control cable is new from last year
The chute and spout are new from last year-this was the third chute and spout purchased since new
oil, air filter and spark plug have been changed every other year with JD lawn mower kit, new LED light bulbs were installed this year to replace the original incandescent lamps.

 

[crazyal]

I've never seen a Yamaha snowblower, I don't think they sell them in the states (but I could be wrong), so I had to look. They look very similar to a Honda. How hard are they to get across the border? I know back in 2000 I bought a Honda outboard for a duck boat in Canada (because it was cheaper than a 2 stroke Merc or Evinrude down here). I knew a dealer that would drive to the border to do the final transaction so they didn't have to charge Canadian tax. After I told a friend he did the same thing but with Yamaha. It's been a good outboard for him. I had a Yamaha snowmachine that ran just fine.