jinma 224--clock went nuts

   / jinma 224--clock went nuts #11  
Hi all,

Just thinking of someting, an alternator with a bad diode could sent a pulsating 12v. that the hourmeter count like an another pulse of the reluctor off the flywheel. To check if the problem is in the charging system i will try disconecting all the alternator wiring and with a full charged batterie start the engine to see if the problem is solve. But doing this test didn't tell you if it is the alternator or the regulator like Tommy's good advice.

Jacques :)
 
   / jinma 224--clock went nuts #12  
Lifts up and down and drops on its own? it slams down, leaver is stiff after it drops? Any help would be apprciative!
 
   / jinma 224--clock went nuts #13  
Lifts up and down and drops on its own? it slams down, leaver is stiff after it drops? Any help would be apprciative!

It would help a lot if I knew what you are talking about. Tachometer needle maybe? :confused:
What's a "leaver"? Do you mean lever?
Perhaps you could start a new thread with more details.
 

Tractor & Equipment Auctions

ROLOFF 500 BBL FRAC TANK (A53843)
ROLOFF 500 BBL...
Informational Lot - Shipping (A53473)
Informational Lot...
2019 Infiniti QX60 SUV (A51694)
2019 Infiniti QX60...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2007 Chevrolet Impala Sedan (A51694)
2007 Chevrolet...
2021 FORD F-150XL CREW CAB TRUCK (A51406)
2021 FORD F-150XL...
 
Top