Jinma 284 PTO will not disengage

   / Jinma 284 PTO will not disengage #1  

b dukes

Member
Joined
Apr 30, 2011
Messages
25
Location
McRae Ga
Tractor
285 MF and 284 Farm Boss and D31 Komatsu
Haven't used the tractor in a few months. After cranking it I pushed in the clutch to put it in gear , wouldn't go in gear just grinding. Clutch was stuck. Cranked it in gear and worked the throttle and pumped the clutch at the same time. It finally broke free , but it seems the second stage is stuck and will not come free. I cranked it with the PTO in gear and cut grass for about an hour. Still stuck. Any ideas without breaking the tractor in half. The clutch , pressure plate and release bearing only has about 100 hr on it.
 
   / Jinma 284 PTO will not disengage #2  
I guess I'd take off the side cover (Under the bracket that holds the loader bracket) and look inside.maybe adjust the clutch arms inside there to open up real wide and maybe you can break free the pto disc in there.after freeing it then readjust the arms.
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2019 CATERPILLAR D6T LGP HI-TRACK CRAWLER DOZER (A52705)
2019 CATERPILLAR...
1995 Rinker Captiva 190 (A53473)
1995 Rinker...
2015 INTERNATIONAL LF687 (A53843)
2015 INTERNATIONAL...
2005 CHALLENGER 500 BBL FRAC TANK (A53843)
2005 CHALLENGER...
Toro Multi Pro 5800 (A53424)
Toro Multi Pro...
 
Top