Chipper Jinma Chipper update

   / Jinma Chipper update #1  

Kays Supply

Veteran Member
Joined
Jul 4, 2006
Messages
1,106
Location
Southern Illinois
Tractor
Iseki TA 207
I looked in several chipper threads and couldn't find one with the update I just did. I was servicing my chipper today and found the pins ,that pull the clutch for the feed roller , had worn almost off. The problem was, that the linkage was riding on the pins and dragging them against the clutch. I cut the bolts / pins off square and after putting it back in I found a light spring and attached it to the arm. The spring keeps the arm away from the clutch.
 
   / Jinma Chipper update #2  
Would it be possible to take a picture or two of what it is you are talking about. For those of us who are verbal description impaired it would be a big help.
Thanks for the heads up.
 
   / Jinma Chipper update #3  
...that and we really, really like photos :D



.
 
   / Jinma Chipper update
  • Thread Starter
#4  
I have already put it back together. I am doing some other projects on my tractor , so I'll try to get some pictures while I am there.
 
   / Jinma Chipper update
  • Thread Starter
#5  
Ok , here is a picture of the spring installed to hold tension on the clutch so it won't eat the dogs.

I also put a picture of the new brush guard and knerf bars on the fenders to keep the brush off my paint.
 

Attachments

  • Spring.jpg
    Spring.jpg
    59.3 KB · Views: 211
  • Hog ready.jpg
    Hog ready.jpg
    62.2 KB · Views: 183
   / Jinma Chipper update #6  
Speaking of these chippers, I have now used mine for about 3 or 4 years. I ran it for days last fall and have been using it a lot this spring. The belts need tightened on the roller and blades should be turned, but otherwise, it has run like a champ. Dollar for dollar, this is one piece of equipment I have really gotten my money back out of.
 
 

Tractor & Equipment Auctions

2004 MACK GRANITE CV713 DUMP TRUCK (A51406)
2004 MACK GRANITE...
1264 (A50490)
1264 (A50490)
DRIVE UP RAMPS (A53843)
DRIVE UP RAMPS...
2008 KOMATSU PC200LC-8 EXCAVATOR (A52706)
2008 KOMATSU...
STORAGE SHELTER KIT (A53843)
STORAGE SHELTER...
2003 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A52377)
2003 Big Tex 10PI...
 
Top