Hello I have a Jinma 454. I have the following problem with this: when I move to speed Hi, it does not take speed? Revolutionizing the engine over 2000 rpm without problems. In the low 1,2,3 I have no problem, the power seems to be correct. The problem is it in the clutch ... Thank you
JM 454 Hi speeds problems
- Thread starter gree
- Start date
- Views: 852
greg_g
Super Member
- Joined
- Dec 18, 2003
- Messages
- 6,126
- Location
- Western Kentucky
- Tractor
- JD3720 Cab, 300X loader with 4-in-1 bucket
No, more likely in the Hi/Lo selector lever. Between the Lo and the Hi positions, is a psuedo neutral. I suspect the throw on the lever is not making it as far as Hi. When in the psuedo-neutral, the gears are simply not engaged.
Check the bottom of the select lever for a broken roll pin
//greg//
Check the bottom of the select lever for a broken roll pin
//greg//