John Deere 1050 and 1070 front ends

[Lafleum1]

Can anyone tell me if the front end of a 1070 would fit the front end of a 1050. They are both 4 wheel drive. The 1050 hub and spindle need replacing.

 

[Barry 1]

Nope, won't fit.

 

[yanmars]

The Yanmar 336 was a "similar" tractor, in fact the 1050 was in part made by Yanmar. Both had IMO weak spindles, especially if one had a front end loader. I had at least two break until I got a later heavier spindle. I do not know if JD had such a spindle.