John Deere 2720 Hydraulic Steering only works with PTO engaged

   / John Deere 2720 Hydraulic Steering only works with PTO engaged #1  

smashedtoe

Member
Joined
May 24, 2020
Messages
27
Tractor
John Deere 2720, 5055E, 6175R and 9620RX
Hello.

I am trying to figure out what happened to my little John Deere 2720.

I had the charge pump recently replaced, however, the steering is very spongy and difficult to turn. Oddly enough, when I engage the PTO, the steering seems to improve. I also notice the hydrostatic drive seems very noisy and reduced response.

Seems to be air in the line which surges out when I crack a line in the system.

Suspecting a relief or bypass valve? Any idea where this is located on this tractor?

Thanks.
 
Last edited:
   / John Deere 2720 Hydraulic Steering only works with PTO engaged #2  
Sounds to me like you need to be discussing this with whoever replaced the charge pump. That would be my starting point.
 
   / John Deere 2720 Hydraulic Steering only works with PTO engaged #3  
Have you confirmed the fluid level and/or type used after the pump work? That would be my first look.
 
   / John Deere 2720 Hydraulic Steering only works with PTO engaged
  • Thread Starter
#4  
Hi Satohbull. Yeppers, I sure have. Using John Deere's liquid gold (or the price of it seems to be) Hy Guard. Levels are good, filters are new and sump screen has been inspected.
 

Tractor & Equipment Auctions

2013 FORD F150 XL TRUCK (A51243)
2013 FORD F150 XL...
2014 Peterbilt 384 T/A Day Cab Truck Tractor (A51692)
2014 Peterbilt 384...
UNUSED FUTURE MINI EXCAVATOR HYD BREAKER (A51244)
UNUSED FUTURE MINI...
2012 VOLVO DBL SLEEPER ROAD TRACTOR (A51243)
2012 VOLVO DBL...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2016 FORD F-250 PICKUP TRUCK (A52141)
2016 FORD F-250...
 
Top