John Deere #7 Backhoe on Yanmar 1500D

[mikehalm]

Anyone know if a JD #7 backhoe will bolt up to the frame of a Yanmar 1500D?

Thanks for any information you might provide.

Mike

 

[Ductape]

I would expect you'll need to fab up your own subframe, or have one made for you. Even though many JD compacts were made by Yanmar, you won't find alot that interchanges between the tractors.

 

[mikehalm]

Thanks Ductape.

Can fabricate a frame. Do you think that these size of the JD #7 id compatible with the Yanmar 1500D? It was my understanding that the #7 was built for a JD compact. The information I found was that is was designed for JD 790, 770 and 3005.

Mike

 

[Ford tractor]

Thanks Ductape.

Can fabricate a frame. Do you think that these size of the JD #7 id compatible with the Yanmar 1500D? It was my understanding that the #7 was built for a JD compact. The information I found was that is was designed for JD 790, 770 and 3005.

Mike

I thought the 1500 was a frame size smaller than the 790....yes? If so, the hoe may be too much for it.

 

[Craig Clayton]

How much does the hoe weigh and how much does the tractor weigh and or how deep does the hoe dig.
Craig Clayton