John Deere Baler

[AndrewNC]

I have an old wire baler, complete machine but I can not find a tag or model plate on it. Guessing it's a mid 50's auto tie wire baler with a 4 cylinder Wissconson motor. Would greatly appreciate any advice on locating a modle number, have searched all over it and found nothing.

 

[Tx Jim]

I know the SN tag on my JD 347 sq baler is on RH side of bale chamber close to the tying system, On earlier balers I can't remember as it's been a long time since I worked at a JD dealer. I think it will still be on the bale case close to the tying system. Can you post a photo? If so someone can probably ID it including me. Does it have a 2 or 4 cylinder Wisconsin engine? Smaller capacity balers such as 14T & 24 WS & T had 2 bangers. 214 & 224 balers had 4 cylinders.

 

[Varmint1]

My 214t serial number tag is on the left hand side of the bale shute under the needle drive disc

 

[Tx Jim]

Would greatly appreciate any advice on locating a modle number, have searched all over it and found nothing.

Post a photo and someone will identify the baler.