conesville
New member
- Joined
- Nov 28, 2015
- Messages
- 10
I have a LX5 and been a while since I sharpened blades and tried to get off blades and they both seam to be locked tight. Applied so much pressure in trying to remove that the breaker bar is trying to bend. 1st want to make sure that when removing nut from top opening that they loosen in a counter clock wise turn. I actually tried in both directions and 0 movement. I used a large breaker bar and with a 3' extension bar. I even put liquid wrench on it and no luck. Any input to get nut off? I even tried a impact wrench.