Redneck in training
Elite Member
Just to put it in perspective. How big is your shop?
Just put a Mill and Lathe in the shop
- Thread starter LD1
- Start date
- Views: 4785
Just to put it in perspective. How big is your shop?
Stimw
Elite Member
They are very handy when you need them.
I have a 15" X 54" Cincinnati Hydrashift Lathe that I need to sell but keep putting it off.
I am slow motion moving, retiring and closing my business.
I also have a 12" Atlas that will do all that I need so I don't need both.
I put up a 40' X 60' building at my new home so at least space is not a problem. (YET!)
I have a 15" X 54" Cincinnati Hydrashift Lathe that I need to sell but keep putting it off.
I am slow motion moving, retiring and closing my business.
I also have a 12" Atlas that will do all that I need so I don't need both.
I put up a 40' X 60' building at my new home so at least space is not a problem. (YET!)
Mysfyt
Platinum Member
Did your friend include the tooling with these? If so, great friend! Enjoy!
OP
LD1
Epic Contributor
40x72 in total, but the finished part is 40 x40
OP
LD1
Epic Contributor
I already have a ton of tooling. More than my buddy had anyway. Most if his tooling was stuff I gave him.
czechsonofagun
Elite Member
I got this one for my 50ies birthday few years ago.
- Joined
- Apr 6, 2004
- Messages
- 24,336
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
^^^ You can do a lot of work with it... a friend has done some amazing things building model steam trains.
