oridgeback
New member
- Joined
- Feb 2, 2005
- Messages
- 5
anyone out there in tractor land have a kabota f2000
kabota f2000
- Thread starter oridgeback
- Start date
- Views: 1068
joecdeere
Veteran Member
- Joined
- Apr 13, 2002
- Messages
- 1,709
- Location
- Cumming,Georgia
- Tractor
- 1948 Allis UC Hi-Crop Cane 1941 Allis WC 1948 Allis G with loader, 1948 Allis G with dual disc 1948 Allis G 1948 Allis G 1949 Allis G 1954 Allis G 1959 Ferguson TO-35 1972 MF 135 1979 Power King 2418 1989 Ford 345C TLB
Yep, got two of them, no better large area mower ever built! /forums/images/graemlins/cool.gif
OP
oridgeback
New member
- Joined
- Feb 2, 2005
- Messages
- 5
i have a problem will sloppy steering and all the joints seem ok .any advice
joecdeere
Veteran Member
- Joined
- Apr 13, 2002
- Messages
- 1,709
- Location
- Cumming,Georgia
- Tractor
- 1948 Allis UC Hi-Crop Cane 1941 Allis WC 1948 Allis G with loader, 1948 Allis G with dual disc 1948 Allis G 1948 Allis G 1949 Allis G 1954 Allis G 1959 Ferguson TO-35 1972 MF 135 1979 Power King 2418 1989 Ford 345C TLB
No slop in the cylinder mount? Do you have any delay in responce? or just extra motion in the wheel before the cylinder moves?
OP
oridgeback
New member
- Joined
- Feb 2, 2005
- Messages
- 5
its best discribed that when i'm mowing i'm forever fighting thr wheel to keep it striaght.i've only had i a few months and trying fix her up for the upcoming season.thanks
joecdeere
Veteran Member
- Joined
- Apr 13, 2002
- Messages
- 1,709
- Location
- Cumming,Georgia
- Tractor
- 1948 Allis UC Hi-Crop Cane 1941 Allis WC 1948 Allis G with loader, 1948 Allis G with dual disc 1948 Allis G 1948 Allis G 1949 Allis G 1954 Allis G 1959 Ferguson TO-35 1972 MF 135 1979 Power King 2418 1989 Ford 345C TLB
Have you changed the filter under the fender and cleaned the suction screen from the pump? Is the level correct on the hydraulic fluid? How many hours are on the unit?
OP
oridgeback
New member
- Joined
- Feb 2, 2005
- Messages
- 5
ah so! i have ordered a owners manual but it is still not in.i will check what you have suggested .also the mower deck has a alot of side to side movement.will adjusting to two large springs cure this? thanks again. steve
hwp
Platinum Member
Remember that your unit has hydraulic steering, there is no mechanical linkage so there will be some sloppiness. /forums/images/graemlins/smile.gif
