Diamondpilot
Super Star Member
- Joined
- Jan 18, 2007
- Messages
- 16,316
- Location
- Daleville, IN
- Tractor
- Jinma 254/284 Ford 861 Powermaster at work
KATS #14600 Heater Problem
- Thread starter Smalljobs
- Start date
- Views: 8646
OP
Smalljobs
Gold Member
Chris...looks same as mine. It was 4.8F this AM and I tried a normal start but I think the battery was a little tired from yesterday. Plugged in KATS. 45 minutes later it started. Mission Accomplished!
Diamondpilot
Super Star Member
- Joined
- Jan 18, 2007
- Messages
- 16,316
- Location
- Daleville, IN
- Tractor
- Jinma 254/284 Ford 861 Powermaster at work
Good. Did you touch the block at the rear to see how warm it was?
Chris
Chris
OP
Smalljobs
Gold Member
I only ran the heater for a total of around 40-45 minutes. The hose was warm but I think the block rear was cold. It was 4-5 F outside. I trickle charged the battery today until fully charged. Based on the last few days, I'm pretty sure I can reliably start this tractor with a good battery and no heater down to 10F if I need to. To make things easier on the starter and tractor in general, I'll probably use the heater.
The compression release works really well and the oil pressure comes right up before starting. I like that feature.
The compression release works really well and the oil pressure comes right up before starting. I like that feature.
