Kioti 4010H Rear Remote Kit Installation with loader Question

[sheep_farmer]

We bought a new CK4010 HST with a loader in 2019 and just purchased the Kioti kit to install rear remotes (which we plan to use for a post driver). When trying to install the kit, we realized that the feed line to the valve body is supposed to plug into a port on the transmission that is already being used by the hydraulics for the loader. Of course, it is Sunday, so we cannot call the dealership. We are just wondering what it is going to take to solve this problem. Does anyone have any familiarity with this situation? We are unsure if we need some sort of adaptor and new line or if it may be possible that we need a different kit entirely.

Thanks

 

[ncoonen]

I just put that kit on my CK3510H and wrote up some installation notes that will answer your question. Good luck!

...ned.

CK Series Remote Kit CKA111 Installation Tips

I just finished installing the CKA111 dual rear remote kit on my 2020 Kioti CK3510H and want to put down a few notes to help the next guy who tackles this kit. It isn't a difficult installation but it is tricky in spots and is made much more challenging by the poor instructions that come with...

www.tractorbynet.com