kioti kb2385 back hoe - Hydro leak where rod enters body

   / kioti kb2385 back hoe - Hydro leak where rod enters body #1  

buyerjohn

Silver Member
Joined
May 25, 2006
Messages
167
Location
Berkshires, MA
Tractor
DK45s with cab
Last edited:
   / kioti kb2385 back hoe - Hydro leak where rod enters body #2  
You will not know until you tear it down or someone tears it down. Just might need seals or a new rod

Well, just how close are the measurements from pin to pin?

Is the stroke the same?

Is pin size the same?
 
   / kioti kb2385 back hoe - Hydro leak where rod enters body
  • Thread Starter
#3  
thanks for the quick reply...the overall pin to pin closed distance is within 3/4", stroke is the same, shaft and bore are the same - I was hoping to avoid removing the cylinder to determine the existing pin size. The pin size is the only spec that's not easy to measure on the existing part so was hoping someone else had the same issue.

Kioti replacement is 3 times more expensive and I'm not sure if that's because the pin connections are customized.
 

Tractor & Equipment Auctions

SKID STEER BRUSH ATTACHMENT (A53843)
SKID STEER BRUSH...
2006 International 9400i (A55218)
2006 International...
CATERPILLAR 631E SERIES II MOTOR SCRAPER (A52706)
CATERPILLAR 631E...
2020 INTERNATIONAL RH613 MID-ROOF SLEEPER TRUCK (A53843)
2020 INTERNATIONAL...
REYNOLDS 100 - 8 YARD PULL TYPE SCRAPER PAN WITH DRAWBAR (A52748)
REYNOLDS 100 - 8...
2012 TRAVIS 39FT DUMP TRAILER (A54607)
2012 TRAVIS 39FT...
 
Top