Koyker FEL for my NT204

[FNGator]

The Koyker 140 arrived with instructions consisting of two pages of poorly printed blowups of the parts - useless. Can't even read them with a magnifying glass.

Anyone installed a 140 on a NorTrac 204C or know where I can get some real installation instructions?

Couldn't find much on any of the Koyker dealer sites either.

 

[mlauk]

It has the manual with installation instructions on the koykermfg site.

Koyker Manufacturing - Loaders

 

[wedge40]

I've had my Koyer for almost 10 years now, so things may have changed. But I've called them direct and have talked to their support people and have had excellent results. My guess is you're not looking for the users manual, but intallation instructions. Like how to bolt the brackets to the tractor and how to hook up the hydraulic lines etc. Mine seemed pretty straight forward and I managed to get get the FEL hooked the tractor without issue. It was when I installed the diverter plate for the hydraulics that I had issues. Called them and they lead me through the process over the phone.

Give them a call and see what they say.. If nothing else I'm pretty sure they will email a pdf copy of the instructions, so you can get a better look on your computer how things go.

Wedge

 

[FNGator]

Thanks for the replies.
I just finished installing it - after figuring out how to by trial and error - but I didn't lose any fingers or kill any innocent bystanders.
Well if you don't count spraying them with hydraulic fluid.