Snow Kubota B/L 2563 compatibility question

[Black Hills Kubota Owner]

Does anyone know if I can use a Kubota B/L 2563 snow blower as a three-point mount on my L6060?

 

[moship]

It's my understanding this is a 3-pt model, so technically it will work. However it is only 63" wide which would be very narrow for your L6060. Also believe this was made for much smaller/lower HP tractors.

For a L6060 I'd want 6' minimum width and would be looking for something in the 7' range so the blower is wider than the tire tracks. Not really certain why you're interested in BL2563 for your application.

Correction added in edit:

Doing a bit more research it looks like this could model could be configured as a front mount blower. If the one you're interested in is from a front mount application, I'd worry about the RPM's needed to drive the blower in question.

 

[Black Hills Kubota Owner]

Thanks, Moship. Yes, your info seems to confirm what I've been able to find out as well in that it was designed for smaller tractors. I'm not too concerned about the width in that I would probably use it just for cleanup work after using my 84" rear blade and front bucket for snow removal. The only reason I'm looking into it is there is one available at an upcoming local auction so thought I'd look into its feasibility. The RPM thing is a concern as well, so I'm thinking I will likely pass on it since it appears that even if I were able to make it work, it's really not the best match. Thanks again for the info.