I have been looking to remove the tires someone put on this tractor; and installing R-1 tires on it.
What is on it now cannot be correct for the ratio; as the front universal joint to the pinion had the
splines taken out. It was smooth bore. No wonder there was no 4 wheel drive.
Front tires are 155R12 and the rear are LT235/85R16.
This is a grey market so i cannot find the correct ratio for this tractor. Have been given numbers 1.46 to 1.326?
One gentleman on here posted these were made for rice paddies and used Bridgestone tires.
But the chart he posted did not have a 500-12 tire listed; it started at 600-12. If I go with Carlisle 500-12 and 8-16 and use the Titan lead lag calculator it comes out negative.
really could use some help here
Joe
What is on it now cannot be correct for the ratio; as the front universal joint to the pinion had the
splines taken out. It was smooth bore. No wonder there was no 4 wheel drive.
Front tires are 155R12 and the rear are LT235/85R16.
This is a grey market so i cannot find the correct ratio for this tractor. Have been given numbers 1.46 to 1.326?
One gentleman on here posted these were made for rice paddies and used Bridgestone tires.
But the chart he posted did not have a 500-12 tire listed; it started at 600-12. If I go with Carlisle 500-12 and 8-16 and use the Titan lead lag calculator it comes out negative.
really could use some help here
Joe