jwiseguys
New member
I have a B20 with a BT750b backhoe attachment that has swing issues.
I have cleaned all the connections and applied dielectric grease, Replaced the swing angle sensor,
have gone through the kubota service bulletin #sb93-23.
Have checked the Hydro fluid level (it's just above full).
Here are the symtoms:
1,Low or high idle will not swing, move hoe from shop to barn and hoe will start to function.
2,When functioning hoe swings smooth to the right but slower and erratic to the left as if low on fluid.
3,All other functions work cold or warm.
4, this all began after breaking a front hose for the bucket.
If anyone has been through this dilema I would like some input on this problem.
Spending valuble Salmon fishing time wrenching and wondering......
I can post some images if needed.
I have cleaned all the connections and applied dielectric grease, Replaced the swing angle sensor,
have gone through the kubota service bulletin #sb93-23.
Have checked the Hydro fluid level (it's just above full).
Here are the symtoms:
1,Low or high idle will not swing, move hoe from shop to barn and hoe will start to function.
2,When functioning hoe swings smooth to the right but slower and erratic to the left as if low on fluid.
3,All other functions work cold or warm.
4, this all began after breaking a front hose for the bucket.
If anyone has been through this dilema I would like some input on this problem.
Spending valuble Salmon fishing time wrenching and wondering......
I can post some images if needed.
