Kubota BX pallet forks

[DGS]

The LA211 loader lifts 211kgx2.2/lb=422lbs.
DGS

 

[Just2quickz28]

The LA211 loader lifts 211kgx2.2/lb=422lbs.
DGS

Yes but there are other loaders for the BX. LA 240 loader has these specs:
GENERAL INFORMATION





Manufacturer
Kubota

Model Year
2010

Model
LA240

DIMENSIONS
Bucket Width
48 in. (1,219 mm)

MEASUREMENTS
Lift Capacity
518 lbs. (235 kg) @ 19.7 in. forward

Lift Height
71.3 in. (1,811 mm) to bucket pivot pin

Reach Height
54.7 in. (1,389.4 mm) with attachment on ground

Dump Angle
45ｰ maximum

Attachment Rollback
29ｰ

Digging Depth
4.7 in. (119.4 mm) at bucket leveled

Operating Speed
2.9 sec. raising time to full height without load
2.9 sec. lowering time without load (powerdown)

 

[tommu56]

Just2quickz28

that is the link on youtube i wanted to post

I got all the steel except the latch stuff now i just have to get time to work on it.

I also scrounged up a side shift back plate and forks from a forklift for the fork build part

tom

 

[Just2quickz28]

Just got a quote for the micro max forks from an online dealer for 475$ plus 80$ shipping across the country from WA to RI.

So back to the original question. Has any one tried the pin on forks from everything attachments?

 

[jhloiac]

Had just purchased the Bxpanded Hooks and liked them. After a lot of research, decided to spend the extra $ on the pallet forks. The Clamp-on styles were cheaper but too big and heavy for what my 1870 could handle without stressing everything. Just received the forks. Well made and very easy to take on and off. Should suit my needs just fine. People have to realize these SCUT's aren't meant for those 42", heavy forks.