Kubota BX2200d Not Starting..Information needed.

[Nessie]

Last fall My husband was using the tractor cutting high brush, the fan blades under the tractor we gone due to the high brush.
and the tractor got hot. He stopped mowing and got it back home. Replaced the blades on the tractor and now it will not
start.. Does anyone have any ideas what to check for before we try to get it to a dealer.. we don't have a trailor
to hall it in so going to try to troubleshoot it if we can. All your help is appreciated. Thanks

 

[jwatt51]

I have a BX25 and every now and then it won't start. I found that a wire that goes to the starter keeps coming off the connection post.Looking from the drivers seat,it's on the right hand side of the motor.It's the small wire that goes to the starter. I hope this is the problem for you.

 

[uglyboywith11fingers]

maybe a bit more info is needed...
when you say it won't start, does it crank over but not start running, or does it do nothing when you turn the key to start ?
do you hear the fuel pump running/clicking when you turn the key to the on position ?
a common no-start issue on a BX is a safety switch or related wiring issue... (hydrostatic pedal or PTO lever or seat switch)
maybe some wiring or safety switch underneath was disturbed when fixing the broken fan...

Pete

 

[jjkw60]

I had a similar issue when my B7100 got hot. I stopped it when I should have let it run a bit to cool off. When I went to start it nothing not even the glow plugs worked. It was the battery. Icharged it up and good to go. Hope this helps. Break out the meter.