aczlan
Good Morning
- Joined
- Mar 7, 2008
- Messages
- 16,985
- Tractor
- Kubota L3830GST, B7500HST, BX2660. Formerly: Case 480F LL, David Brown 880UE
Looking at modifying a Ford 715 or Kubota L322 snow blower to mount on our BX2660. We already have the quickhitch with the plow, so my thought is to get the Kubota blower side mounting bracket (70001-00702) and mount the snowblower to that, then figure out which PTO shaft we would ened to use.
Can someone who has a BX2750 snowblower take the following measurements for me?
A to B - Height from hole to hole on the side of the bracket
B to C - Width across the mounting bracket
B-C to D - Depth from the part of the quick hitch closest to the tractor to a line drawn between B and C
D to the PTO shaft - The distance from the middle of the bracket to where the PTO shaft comes out of the housing
Thanks
Aaron Z
Can someone who has a BX2750 snowblower take the following measurements for me?
A to B - Height from hole to hole on the side of the bracket
B to C - Width across the mounting bracket
B-C to D - Depth from the part of the quick hitch closest to the tractor to a line drawn between B and C
D to the PTO shaft - The distance from the middle of the bracket to where the PTO shaft comes out of the housing
Thanks
Aaron Z
Last edited:
