I took the post off of my LA211 front end loader and I'm using the valve to control my BX2750D snowblower. This year I'm hooking up a hydraulic motor to my chute to rotate it. I'm using the ports of the valve that control the dumping of my LA211 front end loader bucket. When I push the lever of the valve to the right the chute rotates clockwise. When I pull the lever to the left nothing happens. I then switched the hoses at the hydraulic motor and the chute rotates counter-clockwise but not both ways. That told me that the hydraulic motor is reversible like the website said where I purchased it. Is that correct? Does anyone know where I'm going wrong and why the valve isn't turning the chute in both directions?
Kubota LA211 control valve with a BX2750D snowblower
- Thread starter mikebx220
- Start date
- Views: 1262
Leejohn
Elite Member
Move your lever to hard right and see if it moves then. You have 3 different points with the lever.
David_Kb7uns
Veteran Member
The curling function on that lever has regen function for curling while lowering the bucket. Also there is float function on the main boom cylinders
