Kubota minidigger hydraulic valve-joystic identyication

[kaukazz]

HI,
i'm planning to buy hydraulic valve,joystic from scrapped kubota digger, pictures attached.
My questions-
what type of valve is it?
nominal flow litres/min?
max pressure?
is it 2 spool valve? port in, port out, and 4 ports for cylinders?
i'm planing to fit it on mini digger build form scratch, powered by 22km two cylinders engine

Thanks for help
pic attached

 

[J_J]

Just looking at a valve can only tell you a few things.

They may be direct acting valves, pilot operated valves, solenoid valves, joystick lever operated valves.

In order to know the specs, you would enter the numbers in a data base search and see what you find.

You might see a manufacturer label on the valve.

You won't know the pressure or GPM's unless you find the specs for the valve.

What you are asking is a bit much.

I wished I could just look at something and rattle off the specs, and sometimes you can do it if you have worked with that same item before.

 

[Bob Rooks]

JJ is correct. Not much you can tell from that pile. Find the make, model, year, and serial number of the machine those parts came from, and then look up the specs for that machine.

 

[boggen]

ditto other comments,

get ya a pad of paper, find a number or lettering or something on a item. right it down and what part you found it on. then start searching through google.

google may not find anything at all. while other links may return no image, and some sort of description / price. ya just gotta keep searching. and hope for the best.

if you knew what machine those parts came from. you might have better luck. tracking stuff down as far as specs.

looking at picture, i see top joystick in picture, looks like some sort of stamped in lettering on it, the hyd pump most likely have some sort of stamped in or plat on it. the solinoids look like they have some info on them. the individual valve bodies most likely have some sort of stamp or plate on them as well. you may have to take some of the stuff apart to find the numbers / info that are on the parts.