Just bought a used ZD323, with the 60 inch deck, I went to change the oil and filter and my manual called for 3.7 qts, I put in the 3.7 qts and the oil came up about halfway on the dipstick. After it was all said and done it held about 4qts and 4 ounces. I did not know this was normal or not, thanks.
Kubota ZD 323
- Thread starter mtman120
- Start date
- Views: 13716
Will_C
Veteran Member
- Joined
- May 24, 2002
- Messages
- 1,778
- Location
- Upstate N.Y.
- Tractor
- Kubota L3560, Toro 52" and 60" ZTRs, Kubota RTV 900
Not unusual. I had a BX 2200 and serviced 2 others for friends. Everyone held a different amount of oil.
Will
Will
Inspector507
Super Member
Could the 3.7 qts be without filter change? I only have 25 hrs on mine, so I haven't done the oil yet.
