L3400 3 point hitch (kit?)

[Lobo1960]

I purchased a used L3400 (and got a pretty good deal) with a backhoe and front-end loader. It did NOT come with any 3-point "stuff." I see 3-point hitch kits EVERYWHERE for the "B" series tractors, but cannot find anything similar for my L3400. Is there such a kit available? I have contacted a couple of Kubota dealerships for information, and they want to build one for me, but when they were working on the parts, I asked them to stop when they got to $1000 (and weren't complete). Will a "B" series "kit" fit my tractor? Is it worth finding the kit, or should I save my pennies and just go through Kubota (I am a disabled vet with a limited income, so there's that)? As an aside, does anyone have a used set of 3-point hitch parts? Thanks in advance. (I did look to see if this question was previously answered, and did not find it anywhere. If it has been, I apologize in advance)

 

[Professor Marvel]

ABOUT | Stabilworks

i would suggest you use these instead of turnbuckles since you need to get the parts anyway
My NH has them from the factory and they are much easier to use than turnbuckles especially when mounting 3pt equipment

 

[fatboycowen]

I was in a similar situation. Mine came with backhoe, but no 3ph parts. Factory parts were horrifically expensive. I ended up buying a universal kit. I had to get measurements from the factory parts, and piece things together, but it was somewhere around $300-400 total.
Here's the website i used.
3 point Hitch Kits for Compact Tractors
I have been happy with the parts. They work well and seem to be tough enough for the job.

 

[Lobo1960]

Thanks for the responses! Will be checking on that fatboycowen.

 

[Dwellonroof]

You wouldn稚 happen to have a parts list or your order invoice for a list; I知 in the same situation.