Snakebit12
Member
I have a Land Pride RCR2596 that I pull with a Kubota M7040. The literature states that this unit has a cutting height range of 2" - 12".
Currently as is, I have the hydraulic cylinder fully extended (8"). As measured on level ground, the bottom of the deck at full extension is 6" off the ground on all four sides so the deck is level. With the blade about 1" above the bottom of the deck, that means that my max cutting height is 7".
Does anyone have one of these cutters and can explain to me how to raise the cutting height to the advertised 12"?
Currently as is, I have the hydraulic cylinder fully extended (8"). As measured on level ground, the bottom of the deck at full extension is 6" off the ground on all four sides so the deck is level. With the blade about 1" above the bottom of the deck, that means that my max cutting height is 7".
Does anyone have one of these cutters and can explain to me how to raise the cutting height to the advertised 12"?
