Henro
Elite Member
- Joined
- Jul 4, 2003
- Messages
- 4,982
- Location
- Few miles north of Pgh, PA
- Tractor
- Kubota B2910, BX2200, KX41-2V mini EX
<font color="blue"> I think Henro modified his rake so that it would fit on a BX. </font>
Thread on BX 3PH mod for more lift is here
My rake is the older KK style that I got last summer. I guess I was lucky not getting the newer design with the curved end. Mine is a six foot rake. It would not turn without hitting the ground. After drilling two new holes in the lift rods, my 6' rear blade and the rake both turn all the way around with no problem. The rake just makes it though, with about an inch of clearance...did not have to modify the rake at all.
This is how the rake looks now with more lift on the 3PH.
Thread on BX 3PH mod for more lift is here
My rake is the older KK style that I got last summer. I guess I was lucky not getting the newer design with the curved end. Mine is a six foot rake. It would not turn without hitting the ground. After drilling two new holes in the lift rods, my 6' rear blade and the rake both turn all the way around with no problem. The rake just makes it though, with about an inch of clearance...did not have to modify the rake at all.
This is how the rake looks now with more lift on the 3PH.
