Mowing Latest 2025r owners
- Thread starter ipwanab
- Start date
- Views: 5072
KennyG
Elite Member
I assume the 2 series still has the rubber motor mounts. Vibration is not really notable on my old 2320.
KennyG
Elite Member
It will run up to 3200. The PTO speed is 3000. I think it's essentially the same Yanmar engine.
RalphVa
Super Member
- Joined
- Dec 19, 2003
- Messages
- 7,885
- Location
- Charlottesville, VA, USA
- Tractor
- JD 2025R, previously Gravely 5650 & JD 4010 & JD 1025R
I never rev my 2025R to full PTO speed because I simply do not need the hp. Only need about 19 like I had in the 4010. So, I only rev it to 2500. Plenty for both bush hog and chipper/shredder work. Only time I could maybe see using full rpm on it would be if I had a snow blower. However, even at the 3100 or so "PTO" speed on the engine, it is not as loud as the 4010 was.
This is a MUCH smoother engine than the one the same size on the 1025R. THAT is/was a rough engine. **** thing idled at 1800, too. Ridiculous. Maybe I got a lemon. Everything else on it was lemony, maybe the engine, too.
Ralph
This is a MUCH smoother engine than the one the same size on the 1025R. THAT is/was a rough engine. **** thing idled at 1800, too. Ridiculous. Maybe I got a lemon. Everything else on it was lemony, maybe the engine, too.
Ralph
Different engine. 2320 used a Yanmar 3TNV76 whereas the new 2025R uses a 3TNV80F.
sugarloafguy
Silver Member
- Joined
- Jun 16, 2006
- Messages
- 117
- Location
- New Gloucester, Me
- Tractor
- New Holland TC29DA/14LA Loader and Tc24DA/12LA Loader
Hi,
If you are in the market for a Deere SCUT like the 1025R you buy the new 2018 model 2025R as it is a little larger on the wheels, tires, fenders and can be equipped with a linked peddle-aka auto-throttle hydro control for the forward/reverse foot controls. If you want a class 1 tractor buy the B2601 Kubota or 1526 Massey Ferguson which also has auto-throttle hydro. Both of those are more tractor than the Deere and lack the annoying "gator plastic" hood and fenders that lacks painted finish and scratches bad with improper care/cleaning. The Deere is a comfortable unit and their 7-iron deck is nice.
Brian
If you are in the market for a Deere SCUT like the 1025R you buy the new 2018 model 2025R as it is a little larger on the wheels, tires, fenders and can be equipped with a linked peddle-aka auto-throttle hydro control for the forward/reverse foot controls. If you want a class 1 tractor buy the B2601 Kubota or 1526 Massey Ferguson which also has auto-throttle hydro. Both of those are more tractor than the Deere and lack the annoying "gator plastic" hood and fenders that lacks painted finish and scratches bad with improper care/cleaning. The Deere is a comfortable unit and their 7-iron deck is nice.
Brian
guys- rode new 2025 . Idle was about 1600 rpm . Measured noise level at seat -running engine only at 3200, was approx 90 dB. I have not checked but would guess that is in line with my zero turn. it just is noiser than previous tractors if I have owned. Driving experience was similar to my last (2520).Loader operation in my mind was smoother than last. Would like pics of someone痴 3rd scv on these small tractors. I have seen the stick figures in jd parts but it is hard to get a feel for where it would mount.
