Mark PC
New member
Has anybody boosted the hydraulics on a Lenar 254 II. If so how please?
Lenar Tractor
- Thread starter Mark PC
- Start date
- Views: 1679
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
How do you mean boosted.
Do you want to raise the relief pressure?
Do you know the pumps max psi potential?
A 2 in bore and 1 in shaft, at 2500 psi will have a force of 7,854 lbs
---------------------------------2950 psi----------------------9,268 lbs
If your system can handle the increase, you tighten down the valve relief adjustment.
You will need a 3000 psi hyd gage to do this.
Do you want to raise the relief pressure?
Do you know the pumps max psi potential?
A 2 in bore and 1 in shaft, at 2500 psi will have a force of 7,854 lbs
---------------------------------2950 psi----------------------9,268 lbs
If your system can handle the increase, you tighten down the valve relief adjustment.
You will need a 3000 psi hyd gage to do this.
shanehobson
Silver Member
- Joined
- Jul 25, 2011
- Messages
- 112
- Location
- New Zealand
- Tractor
- Ford 3000 (x2), Kubota F1900, Kubota B2150HST, IH434, Same Minitauro 60, Zetor 6745 (x2)
I have exactly the same question, did you ever achieve this ?
I'm thinking of fitting this 16 MPA pump
CBN E314 16MPA High pressure gear pump hydraulic oil pump for Fengshou Lenar 254 tractor parts|Oil Filters| - AliExpress
Leejohn
Elite Member
Man look at that shipping cost
