wdchyd
Elite Member
Hyd. jack and helper.
Thomas, You got it right.......:thumbsup:
Let's Get Rich
- Thread starter Mark Page
- Start date
- Views: 2216
Thomas, You got it right.......:thumbsup:
Jay4200
Veteran Member
- Joined
- Nov 23, 2005
- Messages
- 2,053
- Location
- Hudson/Weare, NH
- Tractor
- L4200GST w/ LA680 & BX2200D w/ LA211
lhfarm
Veteran Member
You could package up two heavy duty bungee cords along with these instructions -
1. Position chains directly behind tractor wheel.
2. Using the enclosed auto chain installer strap, hook one end of chain and slide strap through rim slot. Attach hook to opposite side.
3. Drive tractor forward 2', stop and check alignment of chain on the wheel. Adjust as needed.
4. Drive tractor forward 3', repeat above.
5. Drive tractor forward until installer strap just under bottom of tire.
6. Attach chain ends and remove installer strap
--
I'd sell them for $29.95 per side, but if you order today, we will include 2 sets for one low price
1. Position chains directly behind tractor wheel.
2. Using the enclosed auto chain installer strap, hook one end of chain and slide strap through rim slot. Attach hook to opposite side.
3. Drive tractor forward 2', stop and check alignment of chain on the wheel. Adjust as needed.
4. Drive tractor forward 3', repeat above.
5. Drive tractor forward until installer strap just under bottom of tire.
6. Attach chain ends and remove installer strap
--
I'd sell them for $29.95 per side, but if you order today, we will include 2 sets for one low price
