Lenarguy
Bronze Member
Is there a trick to using the cruise control on an LG hydrostat? Or can someone explain how to use it? Thanks!!
LG Hydro cruise?
- Thread starter Lenarguy
- Start date
- Views: 987
gmsssi
Platinum Member
On my old kubota, you set the HST pedal to the speed you wanted and it then had a lock lever under the steering wheel to hold at that speed. Have no idea how a LG works though!
tractordaddy
New member
- Joined
- Jul 29, 2005
- Messages
- 1
Push the foreward pedal all the way down and depress the cruise lock. You can adjust speed by where the hand throttle is set.
montanaman
Gold Member
Once you reach the speed you want, you should be able to just lock the pedal in position with the dash lever. To shut it off, just push the pedal again to release it.
A word of caution about adjusting the speed with the throttle is that you should always operate the hydro at above 2,000 RPM.
Ken
A word of caution about adjusting the speed with the throttle is that you should always operate the hydro at above 2,000 RPM.
Ken
montanaman
Gold Member
I'm a Montana dealer in PA. Great to see how often you are on here helping guys out!! Nice to read all the good things guys are saying about the Montana tractors and I think the name is going to grow pretty quickly!! As dealers, we have choices on what we sell and I think the Montana is a winner!!
Good to meet you Maka!
Ken Walter
Good to meet you Maka!
Ken Walter
