Lift won't work on Ford 801 Powermaster

[mshea]

The center part of the hydraulic pump where the pistons go. a part of the metal separating the pistons from the ball bearings and where seats go has dissolved about 1/4 inch from the top so am going to need the center part of the piston type pump or just a used hydraulic pump off of a dead 801 powermaster.

 

[Soundguy]

in palatka there is a guy selling a hundred series for 500$ might be worth it for parts. you will pay at least half that or 2/3 that just for a pump off ebay..e tc.

ford tractor



there is a fellow named john smith that has one for 400$.. he's a decent fellow:

Hydraulic and Lift Parts For Sale

here's one on ebay for 500$

Ford 600 601 800 801 900 901 NAA Jubilee Tractor Rebuilt Hydraulic Pump No Core | eBay

one for 700$

NCA600F Ford Hydraulic Piston Pump NAA 600 601 700 800 801 2000 4000 Jubilee | eBay

another 700$

New Piston Type Hydraulic Pump Fits Ford 600 700 800 NCA600F | eBay

another 600$ one

Ford Tractor 600 700 800 900 Hydraulic Pump NCA 905C | eBay

2 more 500$ ones.. however one looks to be missing proofmeter drive..

Ford Tractor Reman Hydraulic Pump 2000 4000 601 801 | eBay

Rebuilt Ford Tractor Original Hydraulic Piston Pump Jub NAA 600 700 800 900 Etc | eBay

there were about 10 more pages on ebay i did not look thru..

 

[mshea]

Here is a quick thank you for all of the help. What I found is several things one I put the seets in that came with the rebuild kit and the original seets were already there not chicken or egg? the side of the body of the pump looks like part of the cylinder wall was broken so did the extra set break it? did it finish it off, was it already broken and the extra seets didn't matter because it was broke. so what do you do when it's broke. Buy a used one, buy a rebuilt one or replace just teh part, and if so where to shop. I found T&H sales and salvage in Georgia and they would ell me whatever I wanted so I bought just the body from the and the tractor works like a charm. good luck and thanks
Mike

 

[Soundguy]

glad you are back up

 

[mshea]

when I first put it back together it didn't work but with the engine in idle and my hand able to shut tractor off I opened the drain at the top of the pump and as soon as the air cleared cut the tractor off and closed the drain. After that restarted the tractor and it lifts like a champ.