gippolit
Silver Member
Kioti LK 3054 Rhino BH85 Rhino 2408 loader....
Price 20k.
Price 20k.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
like to know if this a good deal LK 3054
- Thread starter gippolit
- Start date
- Views: 1850
depratt_equip
Platinum Member
new or used? is the 3054 the XS model or just the 3054?
depratt_equip
Platinum Member
Sounds like a good deal to me. Rhino BH's are what we sell here, and we love them. That 2408 Loader is the same as the older Kioti KL128. Where exactly you located at? The non TLB 3054 are also the XS models. Is the one your looking at have the gear shifter in the middle or up on the dash?
depratt_equip
Platinum Member
If you’re asking why I asked about location, just curious to see what tractors are going for in different parts of the US. I didn't mean it to be offense or trying to pry for info. Just curiosity I guess.
If you’re asking why I asked where the shifter is, just determining what model year it is. The new 3054XS sports a lot of upgrades over the 3054, the XS has new features like exhaust under the hood, 10GPM hyd pump, wider front axle and a few other upgrades.
If you’re asking why I asked where the shifter is, just determining what model year it is. The new 3054XS sports a lot of upgrades over the 3054, the XS has new features like exhaust under the hood, 10GPM hyd pump, wider front axle and a few other upgrades.
To20Chris
Platinum Member
It's a good deal - about what I paid for my LK3054 (non-XS model) with Rhino 2408 FEL and 65 BH about a year ago. I got filled tires and a PTO pump for the BH, both of which I highly recommend. With the PTO pump (as opposed to rear hydraulic remote) you don't ever have to open up the hydraulic system when you take off the BH. The rear remote would be nice if you plan on running anything else hydraulic back there though.
What tires are on it?
I had to tweek the bypass valve slighty to get full lifting on the FEL, but it is very strong - strong enough to get the back end light if you are working on even slightly soft ground. And that's with a box blade on the back and filled tires. I would also highly recommend a box blade, even a cheapo King Kutter one like mine.
The LK3054 is a real workhorse, I'm delighted with mine, even without the improvements on the XS model. I can truly say I've never had a moment's regret about either the tractor or the Rhino attachments - other than the paint on the tractor is better than on the Rhino parts. Square is beautiful!
(Yeah, I'm still around - sometimes)
What tires are on it?
I had to tweek the bypass valve slighty to get full lifting on the FEL, but it is very strong - strong enough to get the back end light if you are working on even slightly soft ground. And that's with a box blade on the back and filled tires. I would also highly recommend a box blade, even a cheapo King Kutter one like mine.
The LK3054 is a real workhorse, I'm delighted with mine, even without the improvements on the XS model. I can truly say I've never had a moment's regret about either the tractor or the Rhino attachments - other than the paint on the tractor is better than on the Rhino parts. Square is beautiful!
(Yeah, I'm still around - sometimes)
depratt_equip
Platinum Member
No offense, I was just confused about what you were asking me about. The LK3054 model has the shifter in between your legs and on the XS model they moved it up to the dash. Helps to get on and off better.
