the old grind
Elite Member
- Joined
- Jul 21, 2012
- Messages
- 4,406
- Location
- Mid-Michigan
- Tractor
- NH T-1520 HST, NH TC33DA HST, Case DX26 HST, .Terramite T5C, . NH L785
It's May, 2019 and Terramite owners currently have a 'non-affiliated' website to find parts while the parent company is in continuous reorganization. We've seen a few posts about substituting auto parts, but since some of us aren't adept at linking other posts there's no one place yet to share our findings. I hope this will be the place for TM owners of all models. As such, I've even chosen a thread title that'll hopefully get more search hits than "Where do I look?" or "Can't find parts." 
My T5C is a '98 with Honda GX-620 power and older 'offset' steering column. It suffered from loss of steering wheel center cap, which allowed rainwater to enter the column and possibly contaminate the hydraulic reservoir, & I'll re-post/update replacement info with of the shelf components if/as requested. I also have experience with the different wiring of ign switches with or without an 'M' terminal that older engines use to ground ignition to shut off. SGEs now use 'ground to run' ignition for safety reasons. Either switch type is easy to tweak. The most part I needed was to add a basic automotive relay and wire it to shut off either by key or by built-in low oil shutdown. Our machines don't break easily, but still do.
I only have 600-some operating hours in 13 years but feel confident that if I manage to bust something it won't be a prob to fix or make a part. That only means I don't have much to offer yet, but if other owners need stuff it's be nice to make the options accessible. I concur with member Allan7s that once I butt out this thread could be a sticky to benefit all. Here's where posted a sit rep & linked parts I found for the steering upgrade: (posts # 40-43)
https://www.tractorbynet.com/forums/terramite/129517-terramite-parts-sources-4.html
I've posted pics of the parts (valve, column) elsewhere and will link here anon.
My T5C is a '98 with Honda GX-620 power and older 'offset' steering column. It suffered from loss of steering wheel center cap, which allowed rainwater to enter the column and possibly contaminate the hydraulic reservoir, & I'll re-post/update replacement info with of the shelf components if/as requested. I also have experience with the different wiring of ign switches with or without an 'M' terminal that older engines use to ground ignition to shut off. SGEs now use 'ground to run' ignition for safety reasons. Either switch type is easy to tweak. The most part I needed was to add a basic automotive relay and wire it to shut off either by key or by built-in low oil shutdown. Our machines don't break easily, but still do.
I only have 600-some operating hours in 13 years but feel confident that if I manage to bust something it won't be a prob to fix or make a part. That only means I don't have much to offer yet, but if other owners need stuff it's be nice to make the options accessible. I concur with member Allan7s that once I butt out this thread could be a sticky to benefit all. Here's where posted a sit rep & linked parts I found for the steering upgrade: (posts # 40-43)
https://www.tractorbynet.com/forums/terramite/129517-terramite-parts-sources-4.html
I've posted pics of the parts (valve, column) elsewhere and will link here anon.