Load the spring on Jublee drawbar.

   / Load the spring on Jublee drawbar. #1  

square1

Veteran Member
Joined
Mar 16, 2014
Messages
1,496
Location
Michigan
Tractor
Ford 1700 4x4 w/ FEL
The cotter pin sheared that holds the pivot post on the Jubilees draw bar. I have everything aligned and a smaller pin through the holes but the drawbar swings freely to one side. The other direction the spring inside the pivot housing stops if from going far that direction. Any tips on getting the spring to stop / dampen the pivot in both directions?
Thanks!
20200517_152542.jpg
20200517_152518.jpg
20200517_152456.jpg
20200517_152445.jpg
20200517_152436.jpg
20200517_152411.jpg
 

Tractor & Equipment Auctions

1995 GMC C7 CHIPPER/BUCKET TRUCK (A53426)
1995 GMC C7...
2009 IC Corporation PB105 School Bus (A51692)
2009 IC...
Kubota Salt-Spreader (A52384)
Kubota...
UNUSED Black Steel Diamond Plate Sheet Metal (A53117)
UNUSED Black Steel...
Curry Bac Bottle, 4700 gal bottle with pump/vac  (A52384)
Curry Bac Bottle...
2021 Redirective Crash Cushion Guardrail (A51692)
2021 Redirective...
 
Top