Loader loader bucket

   / loader bucket #1  

wbj459

New member
Joined
Jan 13, 2019
Messages
8
Tractor
farmtrac 300 dtc
Can you adjust the level of a bucket? one of the cylinders is approx. I/4 inch different from the other
 
   / loader bucket #2  
Not really. They work on oil pressure so should equal themselves out. Have you made sure both rear tires are the same air pressure? This will make a difference in the measurements. Considering if you are measuring from ground to bucket, not length of cylinder. Check for worn out bushings or a bent mount.
 
   / loader bucket
  • Thread Starter
#3  
I would guess a bent mount as loaned it out to family member and found out he was using it as a dozer
 
   / loader bucket #4  
Check/tighten ALL the loader frame bolts...sometimes they have a tendency to loosen up, especially on newish tractors...I hit mine with an impact wrench just to make sure. BobG in VA
 
   / loader bucket
  • Thread Starter
#5  
Thanks Bob, I'll give it a try(when it warms up that is)
 

Tractor & Equipment Auctions

1996 Eager Beaver 44ft. 50 Ton Tri-Axle RGN Lowboy Trailer (A49461)
1996 Eager Beaver...
71059 (A49346)
71059 (A49346)
Takeuchi Skid Steer (A49461)
Takeuchi Skid...
ASSET DESCRIPTIONS & CONDITION (A51222)
ASSET DESCRIPTIONS...
2008 CAT 287C (A50854)
2008 CAT 287C (A50854)
JLG 1255 Telehandler (A51039)
JLG 1255...
 
Top