Loader Hydraulic Problem after replacing hose

   / Loader Hydraulic Problem after replacing hose #1  

Fluoronator

New member
Joined
Aug 8, 2011
Messages
2
Tractor
Massey 231s, NH 1725
I blew a hydraulic hose on the loader of my New Holland compact tractor. After replacing the hose I have two new problem with the loader hydraulics. First, pushing the joystick to the quick dump position causes the bucket to reverse directions and scoop instead of dump. Secondly, the bucket will only move half way when scooping and then it acts like it's reached it's positive stop.
I'm sure I didn't reverse any hoses because I only removed/replaced the damaged one. I was careful to bleed air from the hose and also topped off the fluid. What could be the problem?
 
   / Loader Hydraulic Problem after replacing hose #2  
That is a symptom of air in the cyl's Purge the air by cycling the system many times

Check your QD's for good connection also.
 

Tractor & Equipment Auctions

JOHN DEERE 5075E (A53084)
JOHN DEERE 5075E...
Heavy-Duty Ratchet Load Binders & Chains Set (A53117)
Heavy-Duty Ratchet...
2015 FORD F250 SUPER DUTY EXT. CAB (A53843)
2015 FORD F250...
2024 TIMPTE HOPPER 43FT HOPPER TRAILER (A54607)
2024 TIMPTE HOPPER...
2019 Chevrolet Tahoe SUV (A52377)
2019 Chevrolet...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top