Grapple Loader Hydraulics

   / Loader Hydraulics #1  

Spiros

Bronze Member
Joined
Aug 21, 2012
Messages
88
Location
Bartlett, TN
Tractor
Yanmar 2210, YM1900, 1963 Ford2000diesel, New HollandTC33
I have installed a loader on my TC33 and switched the relief/diverter manifold to supply said loader. It works great but my rear lift has ceased to operate.
Upon reading the manual, it states, the diverter valve in the 10 oclock position allows auxillary hydraulics to operate and in the 2 oclock position allows flow to the HPL. Will it not do both at the same time? What am I missing?
Thanks in advance,
Spiros
 
   / Loader Hydraulics #2  
I have installed a loader on my TC33 and switched the relief/diverter manifold to supply said loader. It works great but my rear lift has ceased to operate.
Upon reading the manual, it states, the diverter valve in the 10 oclock position allows auxillary hydraulics to operate and in the 2 oclock position allows flow to the HPL. Will it not do both at the same time? What am I missing?
Thanks in advance,
Spiros

Hello Spiros,

You are not missing anything Spiro, your diverter valve can only
provide fluid power to one function of the tractor at a time.


Christos Anesti
 
   / Loader Hydraulics #4  
You should be able to run both the loader and the three point. I expect the power beyond line from the loader valve is not going back to the correct port. You should post your question in the New Holland forum with some pictures of how your lines are connected so other TC33 owners can comment.
 
 

Tractor & Equipment Auctions

2022 Quick Attach Brush Buster - Heavy-Duty Skid Steer Cutter for Brush and Overgrowth (A53473)
2022 Quick Attach...
UNUSED Heavy Duty Ratchet Strap Set (A53117)
UNUSED Heavy Duty...
CAT 420D IT (A47477)
CAT 420D IT (A47477)
2003 500 BBL FRAC TANK (A53843)
2003 500 BBL FRAC...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2021 Allmand Bros Maxi-Lite II Towable Light Tower (A52377)
2021 Allmand Bros...
 
Top