Loader needed for Satoh/Mitsubishi Buck or Beaver III

Volvoman · Oct 31, 2019

Looking to buy a good used front end loader for a Satoh/Mitsubishi Beaver III or Buck. Anybody have or know of one available for sale? Needing one soon. Thanks for any help finding one.

PILOON · Oct 31, 2019

Also own a Mitsubishi.
Good luck.
If U find a Schwartz grab it, they were what was installed on my Mitsu and it is a real tough loader.
I believe it was a factory supplied unit.

Roadworthy · Nov 1, 2019

I'd part with a loader currently mounted on a Mitsubishi D2350 and throw the tractor in with the deal. It's a perfectly functional tractor and located in eastern Washington state.

Volvoman · Dec 3, 2019

Roadworthy said:
I'd part with a loader currently mounted on a Mitsubishi D2350 and throw the tractor in with the deal. It's a perfectly functional tractor and located in eastern Washington state.

Sorry for the late reply. Harvest intervened. Can you post a photo or two? Is the D2350 larger than the Buck? I知 thinking it might be closer in size to the Bull or possibly the Bison, right?

Vvm

Volvoman · Jan 14, 2020

This proved to be a tough one. So, I put it on the back burner and opted to find one for my S670D Bison instead. But, finding a Schwartz 1200 HD front end loader, the one which was sold with the S670D Bison when new, was probably just as difficult, if not more so. Frankly, finding one with correct S670D mounts.....I thought would be all but impossible. Well, it was....until doing a nationwide search flushed one out. Found one 1600 miles away. It will be back here in a few days. Here is the interesting part. The loader had a Bison S670D attached to it for no added $. Currently, its a a non-runner due to a bad starter (alleged to have been running fine prior to starter death). Also has a broken front final drive case. Not sure if it will become a parts tractor to be tucked back into a corner, or maybe with a little more work to find a final drive and a new hood (crunched on top), and who knows if anything else is wrong, it might become another runner. Actually, these tractors are so scarce, that it might be a better idea to put the time into it and bring it back to its former glory. Anyone here have a final drive case and/or a hood? Not sure if it is the same hood as the last version of the S650G used or not, but maybe? The final drive case, according to Bill R at Valley Power (thanks Bill), was used on several other Mitsubishi models.
Vvm