Loader removal / attachment

   / Loader removal / attachment #1  

Anonymous Poster

Epic Contributor
Joined
Sep 27, 2005
Messages
29,678
I am aware that the JD loaders mount and dimount very easily. Are there other brands that are equaly easy.

Namely NH or AGCO

Where are the AGCOs made and by whom? Anyone had experience with their 33hp model?
 
   / Loader removal / attachment #2  
Tony,

I think all of the new compacts have quick detach loaders. Some may take a few minutes longer than others - but all are pretty easy on and off (compared to the old days). I can remove / attach my FEL on my Kubota in about 2-3 minutes. It is a simple operation.

Agco's are made by Iseki. They appear to be well built tractors. One question I had - when looking at the Agco's a few months back - was downpressure (or lack thereof) on the front end loader hydraulics. I noticed that dumping the bucket (while on the ground) would not lift the front end of the tractor - like the JD, NH and Kubota does. That was one of the issues that helped make my decision to purchase a Kubota. Agco did have 0% financing for 24 months and would also throw in a brush hog with the purchase of any ST compact - which was a great deal. Good luck.

Jeff
 

Tractor & Equipment Auctions

2007 Detroit Diesel Series 60 14.0L 6-cylinder Diesel Engine (A48081)
2007 Detroit...
2018 Terex RL4 4000W Towable Light Tower (A49461)
2018 Terex RL4...
Bradco 78in Skid Steer Grapple Rake (A50490)
Bradco 78in Skid...
2022 Down2Earth 82in x 36ft Two-Car Hauler (A50397)
2022 Down2Earth...
UNUSED 400PCS 39 in. Zip Ties (A50860)
UNUSED 400PCS 39...
UNUSED Bubble Aluminum Foil Reflective Insulation (A50860)
UNUSED Bubble...
 
Top