Location for a decent sized toolbox 2555 cab

[OzarkChris]

I'm fairly new to this forum and new to any cab tractor, but have been using tractors most of my 61 year life. Just traded in 'Lil Orange L3901 for a Mahindra 2555 Shuttle Cab - first cab ever in my life but I'm really enjoying the creature comforts . I would like to put a decent sized toolbox on her, but there really isn't much space I've found. I did notice one post here that used an ammo case attached to the fender but it looks a bit clunky (no offense to OP) and probably wouldn't hold some of the items I would like to keep around - large spud wrenches etc for implements.

I am hopeful that someone has found a place that doesn't interfere with A) Windows opening, B) remotes (x2), or C) washer fluid bottle. When I first got the 2555 I had though I would just keep a box inside the cab, unfortunately this just doesn't work well so I now have tools, gloves, pins, etc on the floor, behind the seat, under the foot gas pedal, etc, etc.

Any suggestions would be greatly appreciated!

 

[ADKMax26]

There was a video on YouTube.

Mine on my 1533 is basically in the same spot but mine did not come with a side step there but did have attachment points so I used angle iron. I believe someone here gave me the idea.

 

[OzarkChris]

A used Snap-on, Matco, or MAC 'workstation' - 11 drawers (+/-) and a work top space. These can be had for around 1k used, and they will last a lifetime of abuse and more. The drawers are so heavy duty on this grade of boxes that they will support 200-400lbs each. Also, the depth of the drawers on these boxes is somewhere around 22"-24".. so you can store a lot more stuff, and bigger tools (prybars, large wrenches, etc) that you'd normally have to hang up on the wall or put elsewhere.

This sounds really great!! Unfortunately, I really don't think something that large would fit on my tractor. Or am I missing something? If so, please provide a picture of where you mounted the "workstation". Thanks