5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,998
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Had a good year so far and I need to expand my shop capabilities as presently I'm subbing out all the waterjet and plasma cutting and I want to bring it into house.
Been looking at Lincoln Torch Mate, Shop Saber and Plasma Cam as well as Armanda.
I want some torch flexibility (as in a hand held torch) versus a cartridge torch (if Plasma, not relevant with a water jet).
Not sure on what size, leaning towards a 4x9 with a water bed underneath to catch the cuttings and one with built in software torch height control to avoid 'crashes' ands far as the Plasma cutter, already have 2 so I don't need another as the one I have (of the 2), has the interface built in.
It will primarily cut ,material in hot rolled sheet and lighter gage stainless, sheet thickness up to 5/8". I was wondering if anyone on here has one, what brand and the pro's or con's of it.
Been looking at Lincoln Torch Mate, Shop Saber and Plasma Cam as well as Armanda.
I want some torch flexibility (as in a hand held torch) versus a cartridge torch (if Plasma, not relevant with a water jet).
Not sure on what size, leaning towards a 4x9 with a water bed underneath to catch the cuttings and one with built in software torch height control to avoid 'crashes' ands far as the Plasma cutter, already have 2 so I don't need another as the one I have (of the 2), has the interface built in.
It will primarily cut ,material in hot rolled sheet and lighter gage stainless, sheet thickness up to 5/8". I was wondering if anyone on here has one, what brand and the pro's or con's of it.
