retiredmgn
Gold Member
- Joined
- May 8, 2010
- Messages
- 454
That 19 second is probabally a little conservative.
There are TWO most popular cylinders and TWO most common pumps. They are the 11GPM and 16GPM pump and the 4" and 4.5" cylinders. For a total of 4 combinations. The 4" cylinders are usually the 20-22 ton models. The 4.5" cylinders are typically rated at 25-28ton.
The 11 or 16gpm pump doesnt change tonnage, it only affects cycle time. The 4" and 16GPM pump is going to be the fastest with a total cycle of ~9sec and the 4.5" and 11gpm is the slowest @ ~16 seconds.
But keep in mind that the cycle time is the time to extend AND retract. And also keep in mind that with a 2-stage pump, that it will slow WAY down in tough stuff and then speed back up on return.
We have the slower 11gpm and 4.5" combo. And it is pleanty fast if working alone. Even with 2, it will work faster than you can keep wood to and away from it:thumbsup:
Good stuff LD. Thanks.
The guy selling said MTD makes a lot of the splitters on the market. One place I stopped to look did have the same splitter with a different name on it.
One thing I didn't like was the cyl was not supported at the outer end.
Here, let me hold your beer. I'm always up for a good show.