Jun 30, 2006 / Losing power on my 45TD #1 H Harry Levine New member Joined Jun 30, 2006 Messages 2 Bush hogging heavy wet grass and losing power. Have upped the rpm to 2400 (2000 is normally fine). Any advice?
Bush hogging heavy wet grass and losing power. Have upped the rpm to 2400 (2000 is normally fine). Any advice?
Jun 30, 2006 / Losing power on my 45TD #2 Redneck_Randy Platinum Member Joined Mar 27, 2006 Messages 578 Location Oklahoma Tractor 2005 New Holland TC35A Dull blades maybe... Cutting wet grass always takes more HP. Have you checked the blades?
Jul 1, 2006 / Losing power on my 45TD #3 D Doc_Bob Elite Member Joined Mar 17, 2006 Messages 3,306 Location Wisconsin Tractor 2003 NH TN70A Power loss with FEL? Tiller? Or is it just with rotary cutter? Bob
Jul 1, 2006 / Losing power on my 45TD #4 PineRidge Super Member Joined Oct 8, 2003 Messages 7,595 Location Northeast, Ohio Tractor LS-MT242HC Don't know what kind of tractor you're using but it takes 2600 RPM on my rig = 540 PTO RPM. I can mow at 2000 RPM until the going gets tough, then the RPM gets ramped up.
Don't know what kind of tractor you're using but it takes 2600 RPM on my rig = 540 PTO RPM. I can mow at 2000 RPM until the going gets tough, then the RPM gets ramped up.
Jul 1, 2006 / Losing power on my 45TD Thread Starter #5 OP H Harry Levine New member Joined Jun 30, 2006 Messages 2 Thanks all for the advice. Changed my blades and revved up to 2600 rpm. Problem solved.