LOST key to 1995 1250MF

jpndi · Aug 9, 2016

I (or they who is not to be named) managed to lose the key to my 1995 Massey Ferguson 1250. I have searched online and can find no MF1250 key or ignition switch. I don't even remember what it looked like so I bought the only key shown for Massey tractor on Amazon and of course it does not fit.

I removed the switch from the tractor and there is no mfg markings that I can find. It looks like OEM from the insulation on the lugs.

I searched again looking at images and NOTHING looks like this switch. I found a couple with six lugs but key entry side was way too small.

The attached pictures show the rear, side and front. Anyone know where I can find one? I have contacted AGCO but no response yet.

P.s. If someone has a 1250 with same switch a picture of the key might really help.

Thanx in advance for any help,
jp

JerryG · Aug 22, 2016

Just go to your dealer and tell them you need a couple of keys. They all carry them. All the 1200, 1400 and more have the same key. If you don't have a dealer close look the part number up on the Massey parts site. Then order they from Jim's Small Engines. They carry Massey parts and they are usually less expansive than a brick and mortar dealer.

JerryG · Aug 22, 2016

Just go to your dealer and tell them you need a couple of keys. They all carry them. All the 1200, 1400 and more have the same key. If you don't have a dealer close look the part number up on the Massey parts site. Then order the from Jim's Small Engines. They carry Massey parts and they are usually less expansive than a brick and mortar dealer.