LX-279 electrical issues

   / LX-279 electrical issues #1  

dphuff

New member
Joined
Mar 12, 2013
Messages
1
Location
Garner, NC
Tractor
John deere LX-279
My tractor ran fine, I loaded into my truck to take it to my other property. I drove it up the ramp, then when I got there I put it in neutral and rolled it down the ramp. Once unloaded it will not start. When I turn the key into the first position the lights come on and everything looks ok, however when you try to start it will not engage the starter. It acts like one of the safety switches is bad, like your foot is not on the break or something similar. I checked the seat switch and the break switch, and they both seem to be operating fine. Is there another switch that will prevent it from starting I can check? Anything else that would cause it not to start?

-D
 

Tractor & Equipment Auctions

2019 Allmand Night-Lite V-Series 7kW S/A Towable Light Tower (A52377)
2019 Allmand...
2025 GIYI GY-X39F Hydraulic Trencher Skid Steer Attachment (A53421)
2025 GIYI GY-X39F...
1998 Ford F800 2,000 Gallon Water Truck (A52377)
1998 Ford F800...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
Peterbilt 377 Semi-Truck (A55218)
Peterbilt 377...
2011 DOOSAN G25KW GENERATOR (A53843)
2011 DOOSAN G25KW...
 
Top