Maintenance Reminder Sheets

jeffinsgf · Dec 14, 2006

I just found a pretty nifty feature on Deere's website. If you go to the page linked here:

https://jdparts.deere.com/servlet/c...osearchcontroller.ProductInfoSearchController

Then enter your model number, it will bring up a "Maintenance Reminder Sheet" with the recommended service intervals and the part numbers for most common service items and some common parts that might need replaced. Mine are getting laminated and mounted on the wall in the tractor shed.

MikeyB · Dec 16, 2006

Bummer, won't work for the 3*20 type tractors.

ChrisJD4320 · Dec 16, 2006

Thanks for the tip. I printed the sheet for my 4320.

rmonio · Dec 19, 2006

Hmm. I can't find where I key in my JD's model # (4600)... do I have to log in first?

-Bob

jeffinsgf · Dec 20, 2006

rmonio said:
Hmm. I can't find where I key in my JD's model # (4600)... do I have to log in first?

-Bob

That's weird. I just hit the link twice. The first time, it didn't come up with the form where you enter the model number. The second time it did. I wasn't logged in either time.

If it doesn't show up, go to the left side of the page and scroll down to the very bottom where there's a link for "Product Info Documents".

rmonio · Dec 20, 2006

Thanks. I tried that route, but it shows nothing for my 4600 except filter kits and canopies. If there isn't anything listed in the product document results then that means I'm out of luck, right? I guess that means they don't have it out there for me...

(Thank goodness I still have the PDF of the on-line manual)

Thanks again for the help!

-Bob

John D · Dec 21, 2006

Thanks Jeff. Bob I went to the second box down and put in tractor and mdl # and it came up. I scrolled down to find your 4600 and they have the 4610 listed. jb

rmonio · Dec 21, 2006

Thanks, John. The 4610 is pretty similar to the 4600 - but fortunately I also was able to get access to the on-line manuals for my 4600 and the checklist is there too (Mike - rockyridgefarm - posted links to all the manuals a while back... even the one's that JD has taken the links away for).

I like the spreadsheet layout for this... kinda nice, really. I will have to adapt it for my 4600 and use it.

Thanks!

-Bob